Replacement Parts/Accessories; Technical Data - Grizzly EV 1201-31 ZV Traducción Del Manual De Instrucciones Original

We can only deal with implements that
have been adequately packed and
carriage paid.
Implements dispatched by unpaid
•
carriage – as bulky goods, by ex-
press or other special freight forms
– will not be accepted.
• We will dispose of your implements
free of charge
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu.
If you have any other questions, contact
the "Service-Center" (see "Grizzly Ser-
vice-Center").
Scarifier drum ........................... 91104428
Aerator drum..............................91104429
Collection bag ............................91104430

Technical data

Electric Scarifier ............ EV 1201-31 ZV
Motor input.................................... 1200 W
Rated voltage ............. 220-240 V~, 50 Hz
Protection Class ................................
Degree of protection ..........................IPX4
Working width .........................max. 31 cm
Working depth .......................max. 10 mm
Weight ................................................8 kg
Acoustic pressure level
(L ) .......................84 dB(A); K
pA
Sound power level (L
measured ....... 98.6 dB(A); K
guaranteed ............................ 102 dB(A)
Vibration at the handle
(a ) ..........................4 m/s
h
= 3 dB
pA
)
WA
=3,16 dB
WA
; K = 2.0 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specified in the dec-
laration of conformity.
Technical and visual modifications may
II be made without notice in the course
of further development. All dimensions,
information and specifications in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
operating instructions.
2
GB
59