HoMedics Nopain 3D Manual De Instrucciones página 6

HOW TO OPERATE YOUR NO PAIN 3D PATCH
1. Press and hold + to power on the No Pain 3D patch. Smart Contact Detection*
is activated with a short and continuous beep
2. Press + again to activate stimulation**
3. Use +/- button to change level of stimulation
4. Automatic power off after 20 minutes
5. Replace battery when the No Pain 3D patch does not turn on.
Press to increase
intensity
Press and hold
for 3 seconds to
power on
* Smart Contact Detection automatically detects connection. An audible alarm (constant beeping) will be triggered
when there is improper contact between the 2 electrodes.
** When power is on, stimulation level is set to 0 for safety purposes. One more press will activate stimulation mode.
6
Press to decrease
intensity
Press and hold
for 3 seconds to
power off