Engine Storage; Other Storage Tips - Snapper 3500W Instrucciones De Uso

Ocultar thumbs Ver también para 3500W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STORAGE
The generator
should be started
at least once every seven
days and allowed
to run at least 30 minutes.
If this cannot
be clone and you must store
the unit for more
than
30 days, use the following guidelines
to prepare
it for
storage.
Generator
Storage
• Clean the generator
as outlined
in "Generator
Cleaning".
• Check
that cooling air slots and openings
on generator
are open and unobstructed.
WARNING
. DO NOT
place a storage
cover
over a hot generator.
. Let equipment
cool for a sufficient
time before
placing the
cover
on the equipment.
Engine
Storage
See engine operator's
manual
for instructions.
Other
Storage
Tips
• To prevent gum from forming in fuel system or on
essential carburetor
parts, add fuel stabilizer into fuel
tank and fill with fresh fuel. Run the unit for several
minutes to circulate the additive through
the carburetor.
The unit and fuel can then be stored for up to
24 months. Fuel stabilizer can be purchased locally.
• DO NOT store fuel from one season to another unless
it has been treated as described above.
• Replace fuel container
if it starts to rust. Rust and/or
dirt
in fuel can cause problems
if it's used with this unit.
• Store unit in a clean and dry area.

Publicidad

Tabla de contenido
loading

Tabla de contenido