Prestigio GeoVision 7790 Navitel Manual De Instrucciones página 6

2. Routing
2.1 Route to a point selected on the map
You can have a route planned to a point, which can be found
and marked on the map and then set as the destination,
while current position of the device, determined by the GPS
system becomes the starting point. To plan a route press on
the map to mark the point, select "Cursor" [1] and then "Go!"
[2]. The route will be displayed on the map [3].
Fig.1
GV7790_QSG_V1.0.indb 4
Fig.1 Fig.2
Fig.3
2.2 Route to an address
To have a route calculated to a point of a known address,
press "Menu" in the bottom left corner of the screen [1] →
"Find" [2] → "By address", then press "Select country" [3]
and start entering the name of a country [4]. Press the icon
in the upper right part of the screen to hide the keyboard.
Select the country [5]. "Select city", "Select street" and
"Select building" become active only if the previous fields
were filled out [6]. When all information is entered the object
will be shown in the screen [7]. Press "Go!". The program
will automatically plan a route from a current location to the
indicated address [8]. Now you can follow the route [9].
Fig.1
Fig.3
Quick Start Guide
Prestigio GPS
Fig.2
Fig.4
5/13/2015 3:50:27 PM