2. Push the top part
part
until it has snapped into place
4
on both sides.
The filter unit is inserted.
Placing the device in the pool
The device can hurt persons in the pool.
- Make sure no one is in the pool while the device is in the water.
A lawnmower can damage a cable placed on the ground.
- Route the cable so that it cannot be damaged by a lawnmower or
similar device.
1. Completely unroll the floating cable
2. Hold the device by the handle
lower it slowly and tilted slightly
forward into the water until sufficient
air has escaped and it sinks to the
bottom. Slowly feed the floating
cable
to control lowering. The
1
device should run at a right angle to
the pool wall.
The device is in the pool.
onto the bottom
2
CAUTION!
Risk of injury!
NOTICE!
and
8
7
2
4
and place it next to the pool without twisting.
1
8
37