Fitting The Blades; Removing The Blades - Moulinex DJAA42 Manual De Instrucciones

EN

FITTING THE BLADES

• Fit the blades (A) with the
appliance unplugged. Place the
blades in their safety sleeve,
teeth facing downward.
1 • Holding the blades by the safety
guards (B), slide them gently
into the appliance and push until
they lock into place (indicated by
an audible click).
• Then carefully remove the safety
sleeve.
Important: The blades are very
sharp. Take great care when
handling them.
OPERATION
2
• Plug in the appliance. Press the
'On' button (D) with your thumb.
BLADE USE
• The all-purpose blades have been
specially designed for superior
cutting performance, and in
particular for slicing food with
a crust or crispy exterior (e.g.
bread, meat joints, etc.).
• Begin cutting the food firmly
3
from the crust, working from the
top downward. Keep the blades
parallel to the cut surface.
• Never attempt to cut through
bones.

REMOVING THE BLADES

4 • Unplug the appliance. Press and
hold the blade release button
(C), then slide out the blades,
holding them by the safety
guards.
Important: The blades are very
sharp.
CLEANING
5 • Separate the blades before
cleaning. Do this by sliding the
rivet (E) out of the eyelet (F).
Wash the blades using warm
water and dishwashing detergent.
Alternatively, the blades can be
cleaned in a dishwasher.
• Clean the appliance with a damp
cloth and dry carefully.
• NEVER immerse the appliance
or clean it under a running tap.
5