Assembly And Operation - Oh!FX MINIFLOW Manual De Instrucciones

ASSEMBLY AND OPERATION

1. Loosen the locking knobs (7), open the foot tripod support (6) so that to form a "V" shape
with the steel legs, and re-tighten the Locking knob. Place the machine on a fl at and
stable surface. You can also fi x the machine in a tripod stand using a stand adaptor (not
included). In this case, open the tripod support (6) so that the biggest leg is in the fully
upright position and the small leg gets horizontally from the rear of the machine. Insert
then the stand adaptor through the hole of this bigger leg to hang the Minifl ow machine on
a tripod stand
2. Thread the OUTPUT TUBE (2) in the thread for the output tube (4).
3. If you need to feed the machine at a distance, insert the absorption hose (5) to the confetti
feeding tube (3).
4. Connect the power cable (8) to a power source or other power control.
5. Turn On the machine by pressing the on/off switch (1) and insert slowly and regularly
through the confetti feeding tube (3) or the absortion hose (5). If you have the machine
fi xed on a tripod, you will be able to feed the machine with confetti and orientate the output
by rotating the machine so that to cover a wider area.
REMARKS
• It is recommended to use confetti of small or medium size in order to avoid that get stuck.
• If you want to use a long absorption hose (over 2m) use then only confetti of small size
such is the square confetti 6mm or 17mm
• When using confetti of large size or introducing a big amount of confetti into the machine
it can get stuck. To unclog the output tube or hose, cover with your hand the output tube
(2) with the machine on, and the confetti will come out instantly by the confetti feeding tube
or the hose.
GENERAL CAUTION FOR MINIFLOW
• MINIFLOW machine has been designed for the eff ect described. Any other use, diff erent
from the written excludes Oh!FX (CONFETTISHOTS SLU) of liability and warranty.
• In case of malfunction, do not attempt to disassemble the machine and contact the
distributor or manufacturer. Any manipulation may exclude the warranty
• Use only the consumables intended for that specifi c use, and duly certifi ed.
• Only one adult and qualifi ed person must manipulate the machine.
3
INSTRUCTION MANUAL