Marmitek PRO SYSTEM 200 Modo De Empleo página 8

If your equipment receives the IR command directly from the remote control and
via IR Control Pro System this may have a detrimental impact on its effectiveness.
If your IR LEDs emit too much infrared it may disrupt the control of your other
devices. Sticking the protective caps over the IR LEDs will resolve both of these
problems.
Art.nr. 08009 - IRCP LED Cover Cap (4 pcs)
IR Blaster
An IR Blaster emits a lot more infrared light (up to a distance of two metres) and
can, therefore, operate numerous devices. As a result, the location of the IR
Blaster in relation to the IR LEDs does not have to be so precise.
Art.nr. 08006 - IRCP blaster LED
See datasheet for the IR Blaster on www.marmitek.com.
Extra remote control
If you want to operate your device from various
places in your home, or if you want to use just one
single remote control for all your A/V devices, then
make your choice from the complete range of
Marmitek universal remote controls. These replace
almost every remote control you are using at the
moment. More information about these so called
universal remote controls can be found at
www.marmitek.com.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on
the product and/or its packaging must not be disposed of with unsorted municipal
waste. The symbol indicates that this product should be disposed of separately from
regular household waste streams. It is your responsibility to dispose of this and other
electric and electronic equipment via designated collection facilities appointed by the govern-
ment or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information about the
disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
8 © MARMITEK