Truck Hardware Gatorback 2020 Explorer Diagrama De Montaje E Instrucciones página 2

4. Gently pull the liner away to install spring nut (d) on recessed factory tab #2, which previously contained
the factory push pin.
5. Install mud flap hole #3 to factory hole #2 through spring nut (d) and spacer (h) using a sheet metal screw (f) and
flat washer (a)
6. Mark the fender well through mud flap holes #4 & #5
7. Using the marks as a guide, install spring nut (l) on upper most mark #6 and spring nut (k) on the lower mark #7.
8. Install mud flap hole #4 to the spring nut (l) using a cap screw (g) and flat washer (b)
9. Install mud flap hole #5 to the spring nut (k) using a cap screw (g) and flat washer (b)
10. Using a square or bubble level, ensure that the mud flap is level. Tighten all fasteners.
11. Install brace on mud flap hole #8 using a machine screw (e) and flat washer (c), and secure with a flat washer (c),
lock washer (i), and hex nut (j).
12. Repeat procedure for the passenger side.
j
i
Please check out our YouTube channel to see an install video for this application.
1
c
6 l
d
2
h
7
k
8
4
b
3
a
5
b
g
c
e
g
f