PALSON LIZ Modo De Empleo página 10

6. Do not use the appliance if the cable shows any sign of damage, if its functioning
indicates any kind of defect, if it works intermittently or stops working altogether.
SAFETY
For additional protection we recommend installing a residual-current appliance
(RCD) with a residual current of 30 mA. In case of doubt, consult an electrician.
Important: This appliance must not be used near sinks or other recipients containing water.
Unplug the appliance when not in use.
IMPORTANT INFORMATION
The advantage of the straightening brush over a straightening tongs is that it does not
remove the moisture from the hair, given that the tongs presses the hair on both sides,
whereas the straightening brush brushes it.
1. This straightening brush has a temperature selector (4-5). Choose a low tempera-
ture for hair that is fragile, damaged or has a tendency to break. Choose a high
temperature for thick hair that is difficult to straighten.
2. Avoid touching the thermal bristles (1) of the brush, make sure you always hold the
handle.
3. Do not leave the brush unattended.
4. Do not use the brush for more than 30 minutes at a time as it could overheat.
5. After using the product, switch it off and unplug it and let it cool down completely
before storing it. Do not use any abrasive liquid to clean the brush. Use a soft, damp
cloth to remove any remains of products from the brush.
Specification:
1. Voltage: DC110v-220v.
2. Power: 29 W.
3. Cable length: 230 cm approx.
4. Optimum heating time: 30 seconds.
5. Minimum temperature 80ºC, maximum 230ºC.
6. Thermostat adjustment segments: 5ºC.
Characteristics:
1. Anti-static ionic technology that reduces the amount of negatively-charged particles
during brushing.
2. Ready for use in 30 seconds.
3. LCD temperature indicator (2).
INSTRUCTIONS FOR USE
1. Plug in the appliance, press the I/O button (3) for 5 seconds to turn on the straightening
brush. Press (+) (4) to increase the temperature or (-) (5) to decrease it.
2. Press the I/O (3) button for 5 seconds to turn off the straightening brush.
3. You can select up to 30 different temperatures: 230ºC, 225ºC, 220ºC, 215ºC, 210ºC,
105ºC, 100ºC, 195ºC, 190ºC, 185ºC, 180ºC, 175ºC, 170ºC, 165ºC, 160ºC, 155ºC,
150ºC, 145ºC, 140ºC, 135ºC, 130ºC, 125ºC, 120ºC, 115ºC, 110ºC, 105ºC, 100ºC,
95ºC, 90ºC, 85ºC, 80ºC.
4. Press (+) (4) once to increase the temperature by 5ºC at a time.
5. Press (-) (5) once to decrease the temperature by 5ºC at a time.
6. Unplug the appliance when not in use.
7. Press the button I/O (3) for 5 seconds to turn off the straightening brush.
6
30725_manual liz.indd 6 9/3/16 13:09