Pairing A Bluetooth Device - Audio-Technica AT-WLA1 Manual Del Usuario

Tabla de contenido

Publicidad

Connecting via Bluetooth wireless technology
About pairing
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are
paired, you do not need to pair them again.
However, you will need to pair again in the following cases:
• If the product is deleted from the Bluetooth device's connection history.
• If the product is sent out for repair.
• If nine or more devices are paired.
(This product can save the pairing information of up to eight devices. If you attempt to pair a new device when
eight devices have already been paired, the pairing information of the new device will overwrite the information of
the device within the eight paired devices that has the oldest date and time for connection to the product.)

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for
the confirmation tone.
1. Starting with the product turned off, slide the power switch to the "ON" position.
• The indicator lamp will light in purple, and then flash in red and blue.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, "AT-WLA1" will be displayed on the device.
• For information about using your Bluetooth device, refer to the device's user manual.
3. Select "AT-WLA1" to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter "0000". The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
7
12:00
100%
Bluetooth
ON
AT-WLA1

Publicidad

Tabla de contenido
loading

Tabla de contenido