Auto Power Off Function; Reset Function - Audio-Technica AT-WLA1 Manual Del Usuario

Using the product
Talking on the phone
• If your Bluetooth device supports telephone features, you can use the product to talk on the phone.
• When your Bluetooth device receives a phone call, the product sounds a ring tone.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.*
1
When Operation
Press the power supply/control button.
Receiving
a call Press and hold the power supply/control
button (for about 2 seconds).
Press the power supply/control button.
Talking on Press and hold the power supply/control
a call button (for about 2 seconds).
Press a volume button (+ or -).
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear a confirmation tone, release the power supply/control button.
• The phone call controls explained above may not be available on some smartphones.

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.

Reset function

If the product does not work or other malfunctions occur,
refer to "Charging the battery" (p. 5) and connect the USB
charging cable. Make sure the cable is carrying power.
Disconnecting and then reconnecting the USB charging cable
will reset the product and should resolve any problem you are
experiencing. If the problem persists, please contact your local
Audio-Technica dealer.
Pressing the reset button does not change any of your
settings (pairing information, volume setting, etc.).*
*The SBC priority connection (p. 12) will be disconnected.
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners, or other solvents for cleaning purposes.
• If the product's connectors, bushing, remote, and battery case are dirty, wipe them clean with a dry cloth.
• Wipe away any perspiration or dirt from the cable with a dry cloth immediately after use. Failure to clean the cable
may cause it to deteriorate and harden over time, resulting in malfunction.
Function
Answers the call.
Rejects the call.
Ends the call.
Each time you press and hold the button (about 2
seconds), you switch the call to your mobile phone or
*2
to the product.*
Adjusts the volume (+ or -) of the call.
10
2