Kohler K-T11836 Guia De Instalacion página 3

Sensor Cover
Setscrew
Tapered Ring
Flange
1. Install the Spout
IMPORTANT! Use care when installing the spout to avoid
scratching the finish.
Remove the thread protector and save the three screws. They will
be required to attach the spout shank.
Discard the thread protector.
Slide the bonnet onto the spout.
Slide the escutcheon and plastic ring onto the spout.
Position the flange on the spout.
Slide the tapered ring onto the shank with the tapered side away
from the spout.
Thread the spout into the outlet port.
Secure the flange to the wall with the screws (wrench supplied)
that were removed from the mudguard.
Snap the plastic ring onto the spout in between the escutcheon
and the wall.
Carefully slide the bonnet onto the plastic ring.
Kohler Co.
Faucet Outlet Port
Tapered Ring
Flange
Plastic Ring
Escutcheon
Bonnet
Screws
3
Discard the
thread
protector.
Spout
1080065-2-A