Wiring Diagram - V-TAC VT-5888 Manual De Instrucciones

Warning!
1) Please make sure to turn off the power before starting the installation.
2) Check the ratings given in the instructions and on the product to make
sure the product is suitable for your application.
3) Install only by certified Electrician.
This marking indicates that this
product should not be disposed
of with other household wastes.

WIRING DIAGRAM

AC95-240V 50~60Hz
Valve
M
Two Pipe, On/off
INSTALLATION
Note: Thermostat is suitable for installation within a standard
86m pattress box or European 60mm pattress box.
Step 1: Switch off the power before starting the installation
(Refer to Fig1).
Step 2: Remove the mounting plate by rotating the LCD part
(Refer to Fig2).
Step 3: Connect the wires according to the wiring diagram then connect
the device to the power supply (Refer to Fig3).
Step 4: Fix the mounting plate into the wall then screw it properly inside
the box (Refer to Fig4).
Step 5: Fasten the body of thermostat and the mounting plate
(Refer to Fig5).
Step 6: Switch on the power and test the device.
AC95-240V 50~60Hz
Valve
Fan
M
A (RED)
Modbus
B (WHITE)
Cooling
Valve
Fan
M
A (RED)
Modbus
B (WHITE)
Four Pipe , On/off
ENGLISH
Caution, risk of
electric shock.
AC95-240V 50~60Hz
0-10V
Fan
Valve
Modbus
B A - +
Two Pipe