Mellerware Flossy! Manual De Instrucciones página 4

ESPAÑOL
may be high when the
appliance is in use.
If the supply cord is
11.
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
order to avoid a hazard.
This appliance is for
12.
household use only, not
professional, industrial
use.
This symbol
indicates that the
surface may become
hot during use.
Unplug the appliance
13.
from the mains before
filling the water tank.
Ensure that the voltage indicated
–
on the rating label matches the
mains voltage before plugging in
the appliance.
Connect the appliance to a
–
base with an earthed socket
withstanding a minimum of
10 amperes.
–
mains socket properly. Do not alter
the plug. Do not use plug adaptors.
Do not use or store the appliance
–
outdoors.
Do not leave the appliance out in
–
the rain or exposed to moisture. If
water gets into the appliance, this
will increase the risk of electric shock.
Do not force the power cord. Never
–
use the power cord to lift up, carry
or unplug the appliance.
Do not wrap the power cord
–
around the appliance.
Do not clip or crease the
–
power cord.
Do not allow the power cord to
–
hang or to come into contact with
the hot surfaces of the appliance.
Check the state of the power
–
cord. Damaged or tangled cables
increase the risk of electric shock.
Do not touch the plug with
–
wet hands.
Do not use the appliance if the
–
cable or plug is damaged.
If any of the appliance casings
break, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
Do not touch the heated parts of
–
the appliance, as it may cause
serious burns.
USE AND CARE
Fully extend the appliance's power
–
cable before each use.
Do not use the appliance if its
–
Do not use the appliance if
–
the accessories attached to it
are defective.
Replace them immediately.
Do not use the appliance
–
when empty.
EN ES