Publicidad
Technical Specifications
The IR extender cable receives infrared commands from the IR Module and
converts these into infrared signals via the IR blaster LED. Install this product
according the user manual of your main product (see www.marmitek.com).
IR extender cable with 1 blaster LED
Connection:
3.5mm jack plug (mono)
IR LEDs:
1x IR blaster LED
Length of cable:
3 meters
IR transmitting range: 2 meters, sensor in a line of sight
IR transmitting angle: 90° (+45°/-45° from centre)
Dimensions:
22 x 12 x10mm
Copyrights
Marmitek is a trademark of Pattitude BV | IRC Blaster 1 LED™ is a trademark of Marmitek BV. All
rights reserved.
Copyright and all other proprietary rights in the content (including but not limited to model
numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the
Content, but without limitation, distribution, reproduction, modification, display or transmission
without the prior written consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions.
IR blaster LED installation
(1) IR blaster LED placed at the bottom to control a stack of components
(2) IR blaster LED placed at the bottom and top to control a tall stack of
components
(3) IR blaster LED placed facing the cabinet door to control a stack of
components
-
+
(1)
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the environment and human health. For more
detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
(2)
(3)
Publicidad
