Steam Ironing - DCOOK 8099001 Manual De Instrucciones

• Set the temperature indicator to the one corresponding to
the fabric. Always check the label of the garment before
choosing the temperature setting.
• Place the iron on its heel and wait until the temperature pilot
light goes out. The iron is now ready for ironing.

STEAM IRONING

Type of fabric
Nylon
Synthetic (e.g. acetate,
acrylic, viscose,
polyamide, polyester...)
Silk
Wool
Cotton
Linen
Care and cleaning
• Fill the water tank (variable steam indicator at position
• Plug the iron into the mains.
• Choose the required temperature.
• Turn the variable steam control between
on the amount of steam required.
• If you want continuous extra steam, hold the selector
down in the
enough steam.
• Put the iron on its heel and wait until the temperature pilot
light goes out.
Attention: set the temperature indicator within the steam
range ( •• or ••• ). If the temperature is too low, the soleplate
Temperature indicator
MIN/OFF
|
•
|
|
••
|
|
•••
|
MAX
|
•••
|
position and release it if the there is
31
Steam ironing
and depending
).