Filling The Water Tank; Temperature Settings; Dry Ironing - DCOOK 8099001 Manual De Instrucciones

HOW TO USE
BEFORE USING THE IRON, remove all the stickers
and clean any manufacturing residue from the
soleplate with a soft cloth.

FILLING THE WATER TANK

You are recommended to use demineralised water. If you wish
to use the steam function, fill the water tank as follows:
1. Unplug the iron from the mains so that it can cool down and
place it in a horizontal position on an even, stable surface.
2. Turn the temperature indicator to "MIN/OFF" and the
variable steam control button to the
3. Open the cover of the tank opening and use the measuring
cup to fill the water tank. Never exceed the MAX level
indicated on the iron.
4. Exert slight pressure until you hear a click to close the
cover of the tank.
5. When ironing, unplug the iron before filling it. Fill the water
tank while the iron is in a horizontal position and without
resting it on the soleplate if it is hot, unless it has a heat-
resistant base.

TEMPERATURE SETTINGS

• You can choose the temperature setting depending on the
fabric you intend to iron.
• Plug in the iron. Turn the fabric selector to choose the
right temperature for ironing. The temperature indicator
will light up. Once you reach the required temperature, the
temperature pilot light will go out.

DRY IRONING

• Turn the variable steam control button to the
• Plug in the iron.
position.
30
position.