not overfill to avoid splashes when the motor is
running.
• Plug the appliance into the mains.
• Place the head of the shaft in the ingredients
before pressing the switch. This will prevent
splashes when the motor is on.
• Switch on the motor by pressing one of the speed
switches (I or Turbo).
• Blend, but remember to take the set breaks. For
every one minute of continuous use, you must
break for 10 minutes.
CLEANING
• Always unplug the appliance before cleaning it.
• The motor unit must be cleaned with a damp cloth.
• Unscrew the shaft of the motor base by turning it
anticlockwise towards the open lock.
• Wash the shaft with running water immediately
after use. If it is very dirty, it can be washed with
warm washing water.
• DO NOT WASH THE METAL REMOVABLE SHAFT
IN THE DISHWASHER. The chemical products used
in dishwashers will mark and stain the surface of
23