indicator light will light up to show that the iron is plugged in.
• Hang the garment you want to iron securely, and never direct the steam
towards people, as it could cause burns.
• Test the device on an old garment on its first use, in order to remove any
manufacturing residue.
• Never iron a garment if you are wearing it. The garments should be hung
before using the steam brush.
• The device is ready for use in 30 seconds. Turn the steam head towards
the garment and then press the steam button to the required position,
continuous steam or steam burst.
• Remember that, depending on the type of wrinkle and the type of
garment, you will need to run the brush over the same area several
times in order to completely remove the wrinkle.
• The brush has 10 minutes of use time with a full water tank. Once the
tank is empty, the device stops generating steam.
• Always remember to unplug the device from the mains after use.
• Leave the device to cool before putting it away.
USING ATTACHMENTS
Before attaching any accessory, make surethe device is cool, and cannot
cause burns.
To attach the lint brushes, gently press towards the head until you hear a
click.
To remove an accessory, just pull the tab under the accessory outwards.
23