DCOOK 8102001 Manual De Instrucciones página 34

1. Remove the packaging from the blender.
2. Check that the blender or the assembly parts are not
damaged. If such is the case, do not use the blender and
return it to where it was purchased.
B/ Assembly of the blender
• Inappropriate use of the blender or of the different elements
can cause serious damage.
• Turn off the blender and disconnect the plug from the mains
before assembling or taking it apart.
• The blender has a safety device. It can only be used with
the jug firmly in place.
• The blender jug carries the symbol of a triangle
lower side. The motor base has the symbols of an open
and closed
• Place the jug on the base so that the triangle
pointing towards the open lock
• Turn the jug clockwise until the triangle
the closed lock . Hold the base with both hands. You will
hear when the jug is firmly in place.
• Place the lid on the jug so that the
following position:
• And turn the lid anticlockwise, until the
totally aligned with the spout of the jug.
• The first step is done.
lock.
-90º
.
is pointing towards
symbols are in the
34
on its
on the jug is
symbols are