DCOOK 8102001 Manual De Instrucciones página 35

• Place lid 1 in the filling hole by exerting slight pressure
downwards.
• Use the mixing spatula whenever the food gets stuck. This
spatula can be attached to the slot in the lid of the filling hole
C/ Setting speeds
The speed control is used to choose between the 4 speed
levels and to switch off the blender, level "0".
• Start blending at minimum speed "1".
• Then, raise the speed depending on whether the food you
wish to blend needs more or less speed.
• The blender switches off if the speed control is set at level
"0.
• The blender has a pulse function. It is a short operating
function at maximum power. When this function is used,
maximum speed is reached immediately.
• Use the pulse function if you wish to do some intense
blending for a short period. For example, to make froth or
crush ice (see "Crushing ice cubes").
To enable this function:
• Press the button continuously and keep it in this position as
long as you wish the operation to last. Only use this function
intermittently and never exceed the maximum operating
time.
• Release the button to stop the blending process.
D/ Use of the blender
• Clean all parts of the blender before first use, as indicated
in "Cleaning".
• Take into account the level marks. Fill the blender jug at
least up to the minimum mark (250 ml) and do not exceed
the "MAX" mark (1,500 ml).
35