Important Messages And Frequently Asked Questions - Vivanco BTC 700 Manual Del Usuario

4. Important Messages and Frequently Asked Questions

1) Except handsets, what kind of devices can the BTC 700 communicate with?
Besides pairing with a handset for receiving and making phone calls, the BTC 700
can also communicate with PDA and computer that equipped with Bluetooth. For
example, when communicating with a computer (through a USB Dongle) users can
chat and/or listen to music over the Internet.
2) Red LED blinking?
Low battery indicator; please recharge your battery as soon as possible.
3) Can't power up the device after charging more than 20 minutes?
For the first time, the device should be charged at least 40 minute prior tuning on, It
is recommended that the battery should be fully charged before using the device.
4) Without charging indicator?
When the battery runs off or the BTC 700 has not been used for a while, the Red
LED may take a while to light up after the charger connected.
5) Can't hear anything on BTC 700? you should check the followings
BTC 700 is power on
BTC 700 has been paired with a handset
BTC 700 should be connected with a handset (except the handset only
supports Handsfree Profile）
BTC 700 and handset are within 10m
BTC 700 and handset should have good single strength
6) How many devices can a BTC 700 pair with?
BTC 700 can be paired with up to 8 devices, please refer section 2.4.2 for details.
7) BTC 700 can not be found when a handset tries to pair with it?
Your BTC 700 may not be in the pairing mode, please refer section 2.4.1 for details.
8) Do the paired BTC 700 or the paired handset need to be repaired power off?
No. Please note that for the handset supports Handsfree profile, the BTC 700 and the
handset must be connected first. Refer section 2.4.4 for details.
9) Voice dialing does not work?
First check the handset supports voice dialing function; make sure you have recorded
the voice tag. Please note that noisy environment will affect voice dialing.
10) Can't realize any functions?
In the course of using, sometimes the BTC 700 cannot work property by some wrong
operations. At this time, connect the charger to the power outlet; plug the mini USB
connector of the charger to BTC 700's charging port to start charging for a few
seconds. Then release the charger from the BTC 700 and the power outlet, and turn
on the BTC 700 to restart.
14