Dvr Cabling - Atlantis NetDVR V400 Manual Del Usuario

Tabla de contenido

Publicidad

1.6 DVR CABLING

Connect a video cable with BNC connectors from your monitor to the BNC video output ports on the
rear panel of your DVR .
Connect a VGA cord (not included) from your monitor to the VGA output on the rear panel of your DVR
(or use BNC Output).
Connect the USB mouse to the USB slot for mouse on the rear panel of the DVR.
Connect one end of the network cable (not included) to RJ-45 port on the rear panel of the DVR.
Connect another end of the network cable to your router, modem or other network connection device.
Plug in both of the Camera & DVR power supply to an open outlet.
44

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Netdvr v810

Tabla de contenido