Energy saving tips
Make sure the appliance is properly ventilated (see INSTALLATION).
Do not install the appliance in direct sunlight or in the near of heat sources (e.g.
stoves, heaters).
Avoid unnecessarily low temperature in the appliance. The energy consumption in-
creases the lower the temperature in the appliance is set.
Open the appliance door as little and as briefly as possible.
Do not exceed the designed amount of bottles to avoid obstructing the air flow.
Keep door seals clean so that the door always closes correctly.
The most energy-saving configuration requires shelves to be positioned in the
appliance on factory-fresh condition, and wine to be placed without blocking the air
outlet of the duct.