Enable Or Disable The Mute Mode; Enable Or Disable The Wifi Mode; Connect Your Smartphone To The E.zixtreme Camera - E.zicom e.zixtreme Manual De Usuario

9. Enable or disable the Mute mode

It is possible to disable the camera's beep sound (mute mode).
Simply hold down the button
The corresponding icon

10. Enable or disable the WIFI mode

The e.zixtreme camera is equipped with a WIFI mode, allowing for a link up to a smartphone
running iOS or Android. By default, the WIFI mode is not enabled.
To enable the WIFI mode, hold the camera
The activation status is confirmed by an icon on the camera's LCD screen. Press this button again for
2 seconds to disable this mode.

11. Connect your smartphone to the e.zixtreme camera

In order to connect the e.zixtreme camera to a smartphone and take advantage of the
additional functions, first download the free e.zixtreme
from the iOS and Android app. stores.
Then follow the procedure below:
 Enable the camera's WIFI feature.
 Enable the WIFI function on your smartphone and join the e.zixtreme.
The default network password is:

Launch the e.zixtreme application from your smartphone. Both devices are now connected.
Once the WIFI mode is enabled from the camera, synchronization with the smartphone must occur
within 60 seconds. If the synchronization between the 2 devices fails, proceed in the order of the
two following solutions:
. Disconnect the smartphone from the WIFI network and reconnect. Launch the application once
again.
. Disable and then re-enable the camera's WIFI function. Then, reconnect the smartphone to the
e.zixtreme WIFI network and launch the application.
All manuals and user guides at all-guides.com
2 seconds in order to enable/disable the beep.
confirms the status of the mute mode.
button down for at least 2 seconds.
1234567890
10
application, available
®
Please note
.EN.