Adjusting Volume; Reset Hardware - Iqua BHS-701 Guia Del Usuario

BHS-701_Headset_US_UG.fm Page 9 Monday, August 14, 2006 1:02 PM
EN
Voice dialing (when supported by the phone)
To activate the voice dialing feature of your phone, shortly press Multifunction -button. When
you hear a sound, you can speak the voice tag. Refer to the user guide of your phone for
details. Some phone models do not support voice dialing.

Adjusting volume

Press the Volume Up -button to increase the volume. To decrease the volume, press Volume
Down -button.
Erase paired devices
The BHS-701 can be paired to up to 8 devices. Once it is already paired to 8 devices, the 9th
paired device will replace the 1st paired device. You can also erase the paired device list of
the headset in order to pair it with new devices. When headset is powered on, long press both
the Forward and Backward -buttons until you see purple LED light (the headset has erased
all previous paired device information).

Reset hardware

To reset the hardware, while the charger is plugged into the headset and headset is powered
on, shortly press both Volume Up and Volume Down- buttons simultaneously. The headset
will be powered off (light turns off) once the hardware is reset. You may do this hardware reset
and restart the headset in case the headset is jammed.
9