Technical Data - Forch 3945 15 Manual Del Usuario

Maintenance
• Have damaged or worn parts replaced by original spare parts by your distributor. The use of non-authorized
spare parts can result in malfunctions of the tool and personal injuries.
• Regularly check, if there are possible fractions, unusual gaps, offsets on the tool or if moving parts are
running smoothly.
• In case of corresponding abnormalities the device must no longer be used before it is inspected by an
authorized specialist workshop. Please consider that lots of accidents can be traced back to bad or
insufficiently maintained tools.
Application of the device:
• Cleaning aspirator: For dry cleaning / vacuuming of dirt in the passenger car.
Safety warning notes for the operation with the vacuum cleaner safety instructions:
• The Tornador vacuum cleaner attachments cause considerable sound pressure. Please wear appropriate
ear protection in order to avoid harmful noise.
• When working with the vacuum cleaner attachment small parts might be swirled: Please wear protective
goggles in order to avoid injuries of the eyes.
• Use the vacuum cleaner attachment only in well ventilated areas.
• Operate the vacuum cleaner attachment only at maximum 8 bars.
• Never direct the vacuum cleaner attachment towards the face or body.
• Store the vacuum cleaner attachment out of the reach of children.
We generally recommend cleaning any safety-related components such as e.g. safety belts, electrical or
electronic assembly groups using the vacuum cleaner attachment!
Special notes:
The indications and recommendations in word and writing which we give to support the buyer/user are the
result of our present experience and latest knowledge. Due to the diversity of application options and
processing conditions these indications are non-binding and do not constitute any contractual legal
relationship and do not represent any obligations beyond the purchasing contract. In any case, the buyer
must check himself at his sole responsibility if the device is suitable for the intended use. Please always read
the safety-related warning notes of the cleaning liquids and in case of doubt, always contact the manufacturer.
Our liability and responsibility complies with our general terms and conditions and are neither extended by
these information nor by the technical advice of our technical field service.
Operating instructions:
1. Remove loose dirt from the surface to be cleaned (brushing or vacuuming)
2.
Completely push through the "trigger", slowly and circularly move the vacuum cleaner attachment over the
surface which needs to be cleaned.
REQUIRED AIR QUANTITY
For optimum performance the vacuum cleaner attachment Tornador Clean requires a constant air pressure
from 6 to 8 bars.
ATTENTION: Constant air quantities vary depending on the compressor size and power. Always make sure
that the tank and the air hoses are free from soiling of any kind.
Explanation of the symbols:
Wear ear protection, protective goggles, appropriate dust protection mask, protect your hair with a hairnet, if
necessary, wear safety gloves and read the operating instructions in order to ensure the operational safety.

Technical data

Compressed-air connection
Operating pressure/max. pressure
Air consumption
Weight (kg)
Noise level sound pressure (LpA)
Noise level sound intensity (LwA)
Peak-C-weighted peak sound pressure (LpC)
Vibration level
Measuring accuracy vibration level
Serial No
1/4"
6.3bars / 8.0bars
270 l/min
0.4 Kg
93.59 dB (EN ISO 15744)
104.58 dB (EN ISO 15744)
96.30 dB (EN ISO 15744)
0.99 m/sec² (EN 8662-1)
0.495 m/sec² (EN 8662-1)
from WR017-00051 to WR017-01250