Heath Zenith SL-6200 Manual De Instrucciones página 4

actly the same for both the push button and chime for
this system to function.
®
Your Heath
tunes: Ding (one note), Ding-Dong (two note), or
Westminster (eight note) (Available on selected Heath
nith chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed
by following the instructions below.
• Ding (one note tune)
Push button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected
®
Heath /Zenith chimes)
Push button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: To ring different tunes on the same chime, do the fol-
lowing:
1. Set the bottom button code to match the top button code
on the dual push button.
2. Set the chime code to match the push button codes.
3. Set the tune settings for the top and bottom buttons per
the instructions above.
We recommend the back door use the Ding tune and the
front door use the Ding-Dong tune (or Westminster tune,
available on selected Heath
Tune Settings
/Zenith wireless chime has different selectable
®
/Zenith chimes).
-4-
®
/Ze-
598-1144-00