Care And Maintenance - allen+roth SRFP11218 Manual De Instrucciones

CARE AND MAINTENANCE

Inspecting
Inspect this firepit on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this outdoor firepit until the fire is COMPLETELY out and cooled down.
Check handles to make sure they are secure.
Check components for any signs of damage or rust.
If any component is damaged, do not operate until repairs are made.
Cleaning
Clean this outdoor firepit on a regular basis to promote safer use and longer product life.
Note: After repeated use, the finish may discolor slightly.
DO NOT attempt to clean this outdoor firepit until the fire is COMPLETELY out and cooled down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this outdoor firepit in a self-cleaning oven as it may damage this finish.
Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
Rinse clean with water.
Remove built-up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this outdoor firepit until the fire is COMPLETELY out and cooled down.
Once the fire is out, coals are cold and outdoor firepit is cool to touch, remove ashes and
properly dispose.
Cover outdoor firepit with the PVC cover (H).
Store assembled in a location away from children and pets.
Note: If you do not use a cover, store this outdoor firepit in a dry location to maximize product life.
If any parts need paint touch-ups, please follow the steps below (paint included).
1. Mix 5 parts water with 1 part paint, and stir until the mix is consistent.
2. Brush black paint onto the parts that need painting touch-up. Let the paint dry for 2-4 hours.
3. Brush yellow paint onto cardboard, using a cloth to absorb a small amount of paint, and gently
pat the cloth onto the black paint. Let the paint dry for 2-4 hours.
Note: Please dab the cloth onto the cardboard after it has absorbed the paint to avoid applying
excessive paint.
4. Apply a small amount of red paint onto the yellow paint (follow the same precautionary steps
as step 3).
Lowes.com/allenandroth
7