Descargar Imprimir esta página

SAUTHON OSLO BB161A Instrucciones De Montaje página 6

Ocultar thumbs Ver también para OSLO BB161A:

Publicidad

27
x2
BK
x4
• Pour un bon fonctionnement de la commode, il est indispensable
de caler correctement celle-ci. Utilisez une ou plusieurs cales
adaptées (épaisseur) de façon à aligner verticalement les faces de
tiroir. Veillez aussi à resserrer périodiquement les assemblages.
DERNIERS REGLAGES
• For a good using of the chest, it is essential to steady correctly
this one. Use one or several adapted wedges (thickness) in order
to lay out fronts of drawers straight down. Screw up regularly
FINAL ADJUSTMENTS
assembling parts please.
• Für ein gutes Funktionieren der Kommode ist es unerlässlich,
LETZTE REGULIERUNGEN
diese richtig zu verkeilen. Nutzen Sie einen oder mehrere
angepassten Keile (Dicke), um die Schubladeblenden hochkant
auszurichten. Beachten Sie auch, die zusammengebauten Teile
regelmässig anzuziehen.
ULTIMOS AJUSTES
• Para un buen funcionamiento de la comoda, es imprescindible
calzarla correctamente. Ponga una o unas calzas adecuadas
(gruesa) con fin de alinear verticalmente los frontales de cajones.
Cuidado : los ensamblajes deben estar apretados regularmente.
28
F00
F00
BS
x2
DISPOSITIF ANTI - BASCULE
La vis fournie avec le dispositif anti-bascule est destinée à fixer le dispositif dans le meuble. Pour la fixation au
mur, compléter par une vis adaptée au support mural. En cas de doute, contacter un magasin de bricolage.
FALLOVER-PROOF DEVICE
Screw supplied with the fallover-proof device must be used to fix the device in to the piece of furniture. For the
fixation to the wall, complete it by a screw adapted to the wall bracket. In case of doubt, contact a DIY store.
ANTI-KIPP SYSTEM
Das mitgelieferte Schrauben zu der Antikippvorrichtung soll das System im Möbel fixieren. Für eine
Wandfixierung, verstärken Sie die Montage mit einem dafür geeigneten Schrauben. Falls Sie Zweifel haben,
wenden Sie Sich an einen Fachberater im Baumarkt.
DISPOSITIVO ANTIVUELCA
El tornillo surtido con dispositivo antivuelca está destinado a fijar el dispositivo en el mueble. Para la fijación a
la pared, completar por un tornillo adaptado al soporte mural. En caso de duda, ponerse en contacto con una
tienda de bricolaje.
1
2
x1
UA
x1
3

Publicidad

loading

Este manual también es adecuado para:

Oslo bb162a