Seat Assembly - Garden Treasures GSS00133A Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
4. Align the holes of the back crossbar (D) with the
holes in the two back legs (C). For each hole, insert
an M6 x 75 L bolt (EE) through an M6 washer (JJ),
through a back leg (C), through the back
crossbar (D), through an M6 washer (JJ) and into
an M6 nut (HH). Do not tighten completely.
Hardware Used
M6 x 75 L Bolt
EE
M6 Washer
JJ
M6 Nut
HH

SEAT ASSEMBLY

5. Align the two holes in the bottom of an arm (F) with
the holes in the right side of the sling seat (G).
For each hole, insert an M8 x 45 L bolt (FF) through
an M8 washer (KK), through the arm (F) and into
the sling seat crossbar. Do not tighten completely.
Repeat this procedure on the left side of the sling
seat using the other arm (F).
Hardware Used
M8 x 45 L Bolt
FF
M8 Washer
KK
6. Place the sling back (H) between the two arms,
lining up the holes on the sides. For each hole,
insert an M6 x 40 L bolt (BB) through an M6
washer (JJ), through back of the arm and into the
sling back (H). Do not tighten completely.
Repeat this procedure on the other side of the
sling back (H) to attach the other arm.
Hardware Used
M6 x 40 L Bolt
BB
M6 Washer
JJ
4
x 4
x 8
x 4
5
x 4
x 4
6
BB
BB
x 4
x 4
7
EE
JJ
HH
C
D
F
KK
G
JJ
JJ
F
Lowes.com/gardentreasures
FF
H