Garden Treasures GSS00133A Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
HANGER ASSEMBLY
7. Align the hole at one end of a short hanging bar (I)
with the sleeve under the front of the arm (F). From
the outside, insert an M6 x 45 L bolt (CC) through
an M6 washer (JJ), through the short hanging bar (I),
through a plastic washer (MM), through the sleeve
under the arm, through an M6 washer (JJ) and into
an M6 nut (HH). Do not tighten completely. Attach the
long hanging bar (J) to the back of the arm using the
same procedure. Repeat the same procedure to attach
the long hanging bar (J) to the back of the arm, and the
remaining two hanging bars (I and J) to the other arm.
Hardware Used
M6 x 45 L Bolt
CC
M6 Washer
JJ
M6 Nut
HH
Plastic Washer
MM
8. At each end of the seat assembly, bring the holes
in the free ends of the hanging bars (I and J)
together and thread them onto an "S" hook (OO).
Hardware Used
"S" Hook
OO
9. Hang the "S" hooks (OO) and seat assembly from
the loops on the top frame bar (A).
7
x 4
x 8
x 4
x 4
8
x 2
9
8
J
I
F
MM
CC
JJ
JJ
OO
J
I
Lowes.com/gardentreasures
HH
A
OO