Char-Broil 140779 Manual Del Usuario página 5

Tube Burner Replacement (Con't.)
5
Reassemble Tube Burners
1. Thread the carry over tube stud into the burner
2. Attach Electrodes to Tube Burners by securing the clips to the burner.
3. Insert Tuber burner in the grill. Refer to your grill manufacturer's instruction manual for details.
4. Align carry over tube on the stud.
5. Insert clip to secure the carry over tube at each burner.
WARNING - Burners MUST align properly with the Gas Valve. See illustrations below for proper alignment.
6
Valve-to Burner Alignment
The end of the burner must slip over the end of the valve as shown.
Carry over
Tube
3
2
Electrode
5
4
NOTE: If your grill uses a screw
connection to attach the ignition
electrode, you will need to purchase
part number 8696429, or 9749444
Universal Tube Burner Electrode,
available on Charbroil.com.
1
5
Correct
burner-to-valve
engagement
Tube Burner