Operation; Adjusting The Handle Height - Briggs & Stratton BRUTE BT2265HW Instrucciones De Seguridad Y Manual Del Operador

Operation

Adjusting the Handle Height

1. Remove the wingnuts (A, Figure 1), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
Note: Do not remove the lower set of handle hardware (D) .
2. Adjust the handle to a higher or lower height adjustment
hole (A, Figure 2).
3. Reinstall the bolts, washers and wingnuts removed in
Step 1.
B
D
Figure 1: Removing the handle adjustment hardware
A
Figure 2: Height adjustment holes
(Components removed for clarity)
A
C
5