Affixing To Surfaces [4]; Set Up With Tripod [5]; Suspend; Service And Maintenance - Festool SYSLITE DUO Manual De Instrucciones

8

Affixing to surfaces [4]

For securer mounting the device is outfitted
with a detachable stand [4-2] that includes bolt
holes [4-3] for secure attachment to surfaces.
► Pull off stand. Begin by pulling more
strongly on one side.
► Evenly pull off stand.
► Affix stand to surface.
Do not affix device to vertical surfaces
(walls etc.) as this significantly reduces
the cooling performance of the air vents.
► Mount device on stand.
9

Set up with tripod [5]

Use device only with the Festool tripod ST
DUO 200. Tripod height may not exceed
2,0 m. Observe the instructions in the tripod
manual.
► Expand tripod legs completely [5].
► Mount device on tripod.
► Swivel flood light until catch snaps into
place.

10 Suspend

10.1 from wall [6]
Use wall peg [2-1] on rear side of device. Place
on nail or screw head which protrudes from a
wall.
10.2 by rope [7]
Device can be suspended from a rope via the
guiding groove [7-1] located on handhold.

11 Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
► To ensure constant air circulation, always
keep the cooling air openings on the device
clean and free of blockages.
► Only clean the plastic cover on the device
with a soft, dry cloth to prevent damage. Do
not use solvents.

12 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach

13 General information

Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
English
13