CPS CP225 Manual Del Usuario página 6

6. OPERATION
6.1 【Power On / Off】
To turn the radio on or off, press and hold the power on〔
6.2 【Volume】
Adjust the volume level by using〔
6.3 【Transmission】
Press and hold the〔
transmission. Release the〔
6.4 【Reception】
Listen for activity on the selected channel.
6.5 【Key Lock】
〕key and〔
Press〔
6.6 【Channel Selection】
〕key and〔
Press〔
〔 〕key and confirm It by pressing〔
hold the 〔 〕key.
6.7 【CTCSS / DCS】
During setting, to press the〔
number by pressing〔
6.8【Scan】
During setting, to press the〔
〕key and confirm it by pressing〔
by pressing〔
〕key.
pressing〔
6.9【Power Selection】
During setting, to press the〔
〕key and confirm it by pressing〔
pressing〔
6.10【Intelligent ear-mic adjustment】
When plug in ear microphone, the device will automatically reset the volume to comfort level
( originally set by factory or by user whichever the lower )
〕key (16 steps, default 8)
〕key while speaking at about 5cm from the microphone for
〕key to return to standby mode.
〕key simultaneously to select Key Lock ON / OFF
〕until "** CH" is blinking, to select the channel number by pressing
〕key . To select channel quickly, press and
〕key until "CTCSS / DCS***" is blinking, to select the CTCSS /DCS
〕key and confirm it by pressing〔
〕key until "SC***" is blinking, to select the scanning ON/OFF
〕key until "Po***" is blinking, to selectpower HI/Lo by
〕key .
〕key.
〕key. to cancel the scanning by
〕Key.