Motion CM-34 Manual De Instrucciones página 10

Install the smart switch
1
L L N N S1 S2
M
230 V / 50 Hz
L
N
10
Before installing the smart switch ensure that the grid is turned off (turned
down breakers). Connect the smart switch with the power grid according the
schedule below. (The cables can be inserted without pressing the buttons.)
L = Input live line
L = Live line for external switch
N = Input neutral line
N = Motor neutral line
↑ = Motor up line
↓ = Motor down line
L
S1 = Up line of external switch
S2 = Down line of external switch
Maximum motor output power : 200W
Mains Cable
CM-09/CM-10
Max. 10mm
Neutral
Direction 1
Direction 2
Ground
230V
Blue
Brown
Black
Green/Yellow