Motion CM-34 Manual De Instrucciones página 15

Set favourite position
6
(optional)
6.1
6.2
Center
Move the blind to a desired favourite position.
Hold the center button to save this favourite position. The blind shortly stops stepping
indicating the favourite position has been saved.
Change favorite position: To change your favorite position move the blind to a new desired
favourite position. Press the program button on the smart switch to activate program
mode. The blind start stepping. Repeat step 5.2 and afterwards turn off program mode by
pressing the program button.
Before programming a favorite position, the blind needs to be moved
from its top position to its bottom position twice. This is necessary to
save the favorite position. Do not stop the blind during this process.
15