Samsung SEK-1000 Manual De Instrucciones página 4

4. Turn on the TV using the Smart Touch Remote unit accompanying the Evolution Kit and wait for the TV to recognise the kit.
5. Follow the on-screen instructions to upgrade the TV to the 2013 version.
6. Once the upgrade is complete, the TV will turn off and then back on automatically.
The LAN cable adapter and Smart Touch Remote unit can only be used after installing the Evolution Kit on the TV.
✎
Once your TV has been updated using the Evolution Kit, you will be able to use a USB storage device to update the software.
✎
Ensure that the TV update file and the Evolution Kit update file contained on the USB storage device are the same version before
proceeding.
The Pre-Mounting Checklist
[
• Before snapping the Evolution Kit into place, ensure that the other end of the kit has been inserted securely into the two slots.
The kit may be damaged if you continue without securely positioning the kit inside the slots.
• If you are mounting the kit onto a wall-mounted TV, remove the TV from the wall first.
• Mounting an Evolution Kit that has been used on a different TV will reset the user data contained in the kit.
Detaching the Evolution Kit
Grab the Evolution Kit's edges and pull out the Evolution kit with
the right side pushed to detach it from the TV, as illustrated by the
figure side.
English-4
1
2