Rev-A-Shelf 449 Serie Instrucciones De Instalación

1" 2"
Reference for scale
Top left hand slide
TOOLS REQUIRED:
#2 PZ2
ESTIMATED ASSEMBLY TIME:
20 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
A F
A. (6) #8 x 5/8" Flat head screws
for 1/8" spacer
B. (6) #8 x 1" Flat head screws
B
for 1/4" spacer
G
C. (6) M5X14.5MM Flat head
Euro Screws*
D. (6) M5X20MM Flat head
C
H
Euro Screws*
E. (4) #6 x 1/2" Door mounting
screws
D
F. (6) 1/8" slide side spacer
G. (6) 1/4" slide side spacer
E
H. Double-sided tape
* For use with system holes
449 BASE ORGANIZER
(3) screw hole locations
Fig. 1
Fig. 3
Bottom right hand slide
21-5/8"
(549.5 mm)
Fig. 2
System Holes Only /Without System Holes
FRAMELESS SIDE With Without
WALL THICKNESS System Holes System Holes
3/4" M5 x 11.5MM #8 x 5/8"
5/8" M5 x 14.5MM #8 x 5/8"
1/2" M5 x 20MM #8 x 1"
Slide unit into cabinet and
attach door.
(3) screw hole locations
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
Place template and mark hole
locations for the top left hand slide
(See Figure 1). Flip the template
and do the same for the bottom
right hand slide.
Attach slides to side and bottom
of cabinet using (6) corresponding
flat head screws (See Figure 2).
Attach unit to slides
(See Figure 3).
CORRESPONDING
BLUM SPACER
Slide the unit into the cabinet and
attach door using (4) #6 x 1/2" flat
N/A
head screws (See Figure 4).
1/8" Spacer
Note: Align adjustable mounting
brackets to the thickest portion of
1/4" Spacer
the door. Double-sided tape may
be used.
Fig. 4
STEP 1
STEP 2
STEP 3
STEP 4
T-449FL-1018