Publicidad
STEP 1
Disengage the inner member
slides from the unit by pressing
the release trigger up and pulling
the pants rack unit away from the
inner member slide (See Figure 1).
STEP 2
Mount the inner slide members
to the cabinet; if using system
holes, attach them to the cabinet
sidewall using (4) M6 x 6mm euro
screws or measure, mark and pre-
drill (4) holes using a 1/8" drill bit
and attach using (4) #8-32 x 1/2"
wood screws (See Figure 2).
1
8
STEP 3
Slide the pants rack onto the inner
member slides, being sure to engage the
soft-close mechanism (See Figure 3).
2
FIG. 1
FIG. 2
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
Front
Side View
1-15/32"
1-15/64"
7-9/16"
37 mm
31 mm
192 mm
For 14" deep cabinet
For 14" deep cabinet
5/64"
1/16"
1-11/32"
17 mm
14 mm
34 mm
340mm
350 mm
Back
Publicidad
