Cleaning Instructions; Instructions For Disposal - sigel. MU010 Manual Del Usuario

Instructions for use:
Pinboard (MU010/MU011)/Whiteboard (MU020)/Stand (MU050)/Wall track (MU 060)
▪ Tent use: Place a board onto the track on both sides of the stand,
vertically and centrally. Lock the two boards into place with the
clamps (enclosed in the pack). Place the clamps onto the outer
edges of the two boards and pull them downwards until they grip the
boards securely. (Warning: insert and remove the boards carefully to
avoid scratching the board surface and the stand. The boards should
be placed centrally on the track, as they could otherwise fall out,
causing injury or material damage.)
▪ Single use: Place the board in the central slot of the stand and push it downwards until it holds
securely in place.
▪ In the wall track: Two people should lift the board and place it horizontally onto the wall track. Slide
the safety wedges onto the left and right of the board frame. (Warning: if the board is not secured by
the safety wedges, it can fall out, causing injury or material damage.)

Cleaning instructions:

▪ Please use Sigel cleaning products to clean the whiteboard. The Sigel board eraser is ideal for fast
dry erasing. For thorough cleaning, use the Sigel cleaning spray and wipe it off with the Sigel micro-
fibre cloth (see insert for product information).

Instructions for disposal:

▪ Please recycle the packaging in the appropriate recycling bins.
5