Forch 3530 300 Manual De Instrucciones página 30

Place one washer (2) and one bush (3) on each of the four fastening bolts (1).
■
Place this combination in the opening provided on the gripper arm.
■
The bush (3) should be visible through the hole. Now slide the second washer (2) over the
■
bolt (1).
Attach/insert the gripper arm to the frame and pre-install the bolt (1) hand-tight.
■
Finally, install the nut (4) and tighten.
■
Do not overtighten the bolt (1) and nut (4), as this will damage the bush (3)!
■
2
1: Bolt 4×
2: Washer 8×
3: Guide bush 4×
4: Nut 4×
Install the wheels with end caps.
■
1
3
4