Parts Name; Important Safeguards - Sinbo SJ 3136 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
All manuals and user guides at all-guides.com
ENGLISH
SINBO SJ 3136 CITRUS JUICER
INSTRUCTION MANUAL
FEATURES
1. Stainless steel housing
2. All detachable parts for easy cleaning
3. Stainless steel spout with anti-drip function
4. Cord storage
5. Cone-shaped squeezer and dust cover
6. Noiseless extracting while operation
7. AC230V, 50Hz, 100W

PARTS NAME

1. LID
2. SIEVE HOLDER
3. SIEVE
4. JAR
5. SPOUT
6. MOTOR UNIT
7. CONE
8. CONE COVER

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the
following:
Read all instructions before using.
1. To protect against electrical shock, do not immerse cord, plug, or citrus juicer in water or other
liquid.
2. Close supervision is necessary when any appliance is used by or near children.
3. Unplug from outlet when no in use, before putting on or taking off parts and before cleaning. Remove
plug by gripping plug body and pull out of the outlet. Never yank or twist cord to unplug.
4. Avoid contacting moving parts.
5. Do not operate this appliance with a damaged cord or plug, or after the appliance malfunctions, or
has been damaged in any manner, return the citrus juicer to the retail location where it was purchased
for examination, repair, or adjustment.
6. Use this appliance only for its intended use as described by this manual. Do not use accessory
attachments without recommending by the Electronics.
7. Do not use outdoors or operate where oxygen is not being administered or in the presence of explosive
and/or flammable fumes.
8. Do not let cord hang over edge of table or counter, or touch hot surfaces.
9. This appliance is intended for household use ONLY; it is not for commercial or industrial use.
10. Any service of the citrus juicer should be performed by the retail location where it was purchased.
11. To disconnect citrus juicer, wait until motor stops, then remove plug from electrical outlet.
12. Do not operate unattended. Make sure the motor stops completely before disassembling. Unplug
after each use.
SAVE THESE INSTRUCTIONS
- 5 -

Publicidad

Tabla de contenido
loading

Tabla de contenido