Sonoff SlampherR2 Manual Del Usuario página 8

SONOFF TECHNOLOGIES CO., LTD.
4. Add the device
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try "Compatible Pairing Mode "
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
1
two short flashes and one long flash and release. Long press Pairing button for 5s
again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
Tap "+" and select " Compatible Pairing Mode " on APP.
2
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap "Next". Be patient until pairing completes.
Specifications
Model
Input
Output
Max.Load
RF
Screw base
Wi-Fi
Operating systems
Working temperature
Material
Dimension
SlampherR2
100-240V AC 50/60Hz
100-240V AC 50/60Hz
450W/2A
433.92MHz
E27
IEEE 802.11 b/g/n 2.4GHz
Android & iOS
-10℃~40℃
PC V0
67x67x98mm
7
Add Device
Quick Pairing
WIFI devices can be added in this mo
de(make sure the device is in pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
Sound Pairing
Add device in this mode if your
devic e support this feature.
English