Device Description - Airzone KNX- Manual De Instalación

2. DEVICE DESCRIPTION

The KNX-Airzone integration gateway allows connection and communication of the Airzone air
conditioning systems, with distributed or centralized topology, with any sensorial or actuator
KNX element through the TP-1 physical environment.
By means of this gateway, a control of all basic functionalities of the Airzone air conditioning
systems can be made from any KNX control element.
The device general characteristics are described below:
• DIN rail installation.
• Reduced size.
• Connection to the KNX buses (TP-1) and Airzone automation (ModBus).
• Complete compatibility with KNX.
• Configurable from ETS easily and quickly.
• Totally compatible functions with Airzone's specific ones.
• Control of the AC unit from KNX.
• Type of data used standard KNX.
• Type of installation control. The type of installation can be read by means of the
KNX- Airzone gateway, showing if it is an air or water installation.
• By means of the KNX-Airzone gateway, the errors that can occur during
communication with the different zones from the system will be detected.
22
No. Description
Programming key
KNX Bus Connection
Airzone Bus Connection
LED Programming
Led's KNX communications
Led's Airzone communications