Descargar Imprimir esta página

Du Pont WFSS1050 Serie Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

WFSS1050_Shower_instructions
Installation Instructions
In-Line Shower Filtration System
Instrucciones de instalación
Sistema de filtrado en línea para ducha
Proper Installation
Please read all instructions, specifications, and
precautions before installing and using your water
filter system.
STEP 1
Remove the existing shower head from the shower
arm. Clean the shower arm to remove any residue
or debris.
STEP 2
C
Wrap Plumber's Tape
clockwise around the
threads on the end of the shower arm.
STEP 3
Screw the Filter System onto the threads of the
shower arm in a clockwise position until hand-tight.
Using a wrench, tighten an additional 1/4 turn.
C C A A U U T T I I O O N N
Do not over tighten, as this may result in
damage to the Filter System.
STEP 4
Turn on the water to the shower head. In order for
the Filter System to flush out any air and carbon
fines (fine black powder) from the Filter Cartridge,
allow the water to run for approximately 1 minute.
6/27/08
12:07 PM
Page 1
Model Series WFSS1050
Serie del modelo WFSS1050
V.3.0 - 021508
1
2
C
3
4
B
DuPont Part No. WFSSC0501
Parts & Hardware Included
A
Filter System
B
Filter Cartridge
C
Plumber's Tape
Information & Assistance
www.waterfiltration.DuPont.com
828-449-1040
For Service Requests & Product Information
Protect Plus, LLC I Hickory, NC 28601 USA
Hours of Operation: 24 Hours/Day, 7 Days/Week
For installations in Massachusetts, the Commonwealth of Massachusetts Plumbing Code CMR248 shall be adhered to.
2
Filter Cartridge Replacement
1
Turn off the water to the Filter System
2
Turn the head of the Filter System counter-clockwise until it
releases. Gently remove the housing and pull out the used
B
Filter Cartridge
and discard.
NOTE: Water may drip from the Filter System during cartridge removal.
3
Insert a new Filter Cartridge.
4
Screw the head of the Filter System clockwise back onto the
housing until tight.
5
Turn on the water to the shower head. In order for the Filter
System to flush out any air and carbon fines (fine black powder)
from the Filter Cartridge, allow the water to run for approximately
1 minute.
WFSS1050 Series
Package Contents
A
Filter System
C
Plumber's Tape
Filter Cartridge
A
Tools & Materials Required
I
Wrench
800-441-7515
For Safety & Health Questions
B
A
.
V.3.0 - 021508

Publicidad

loading

Resumen de contenidos para Du Pont WFSS1050 Serie

  • Página 1 WFSS1050_Shower_instructions 6/27/08 12:07 PM Page 1 Package Contents Filter System Plumber’s Tape Filter Cartridge DuPont Part No. WFSSC0501 Installation Instructions Parts & Hardware Included Tools & Materials Required Filter System Wrench In-Line Shower Filtration System Filter Cartridge Plumber’s Tape Information & Assistance www.waterfiltration.DuPont.com 828-449-1040 800-441-7515...
  • Página 2 WFSS1050_Shower_instructions 6/27/08 12:07 PM Page 2 Contenido del embalaje Sistema de filtrado Cinta para cañerías Smarter Choices for a Cleaner World Cartucho del filtro Nº de pieza DuPont WFSSC0501 Creating better products for you and your family is what you can expect from DuPont. The product inside this package was created adhering to high standards in quality and efficacy.