1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7883HG
  6. Instrucciones de instalación

Metra 95-7883HG Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 95-7883HG
Honda Fit 2015-up
KIT FEATURES
• Double DIN radio provision
• Painted high gloss black
KIT COMPONENTS
• A) Radio trim panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729
Antenna Adapter: • 40-HD11
METRA. The World's best kits.
APPLICATIONS
95-7883HG
1-800-221-0932
™
Dash Disassembly
– Honda Fit 2015-up ............................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Table of Contents

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 95-7883HG

Resumen de contenidos para Metra 95-7883HG

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-7883HG APPLICATIONS Table of Contents Honda Fit 2015-up 95-7883HG Dash Disassembly – Honda Fit 2015-up ..........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Painted high gloss black KIT COMPONENTS TOOLS REQUIRED • A) Radio trim panel • B) Brackets • Phillips screwdriver • Panel removal tool CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.

  • Página 2: Dash Disassembly

    95-7883HG Dash Disassembly 1. Remove (1) Phillips screw from the 4. Unclip and remove the a/c vent trim panel below the a/c control trim panel including the vents that houses the accessory socket above the factory radio. (Figure D) and factory USB’s then unclip and 5. Remove (2) 8mm bolts securing remove the panel. (Figure A) the factory radio then unclip and 2. Remove (1) 8mm bolt facing up in remove the radio. (Figure E) cavity behind a/c control. 6. Remove (2) screws securing the (Figure B) air bag light. 3. Unclip and remove the instrument 7. Remove (2) screws securing the cluster trim panel. (Figure C) hazard switch. (Figure B) (Figure D) Continue to kit assembly (Figure A)

  • Página 3: Kit Assembly

    95-7883HG Kit Assembly Double DIN radio provision 1. Attach the air bag light and hazard switch to the 95-7883 radio trim panel. 2. Attach the brackets to the radio with the screws supplied with the radio. (Figure A) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) 4. Mount the new radio assembly into the dash and reassemble the dash in the reverse order of disassembly using the 95-7883 radio trim panel.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-7883HG NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7883HG AplicAciones Indice Honda Fit 2015 y mas 95-7883HG Desmontaje del tablero – Honda Fit 2015 y mas ..........2 Ensamble del kit – Provisión de radio doble DIN ........3 cArActerísticAs del kit • Provisión de radio doble DIN •...

  • Página 6: Desmontaje Del Tablero

    95-7883HG Desmontaje del tablero 1. Quite un (1) tornillo Phillips 4. Desenganche y quite el panel de del panel de la moldura que la moldura de la rejilla de aire está debajo del control del aire acondicionado incluyendo las acondicionado que aloja el...

  • Página 7: Ensamble Del Kit

    3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de (Figura A) AXXESS. 4. Monte el nuevo ensamble del radio en el tablero y vuelva a armarlo al revés de como lo desarmó, usando...
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7883HG EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido