Control Panel; Operating Instructions - ETI GROW ELITE 90600366 Guía De Uso Y Cuidado

Control Panel

note: To be controlled with the remote control, the Grow Light must be set to "remote control" mode.
Part Description
1 Display
2 On/Off Turns the grow light on and off.
3 All Controls all paired GrowElite grow lights.
TM
Part Description
4 red- Decreases the amount of red light in the spectrum.
5 red+ Increases the amount of red light in the spectrum.
6 Blue- Decreases the amount of blue light in the spectrum.
7 Blue+ Increases the amount of blue light in the spectrum.
8 White- Decreases the amount of white light in the
spectrum.
9 White+ Increases the amount of white light in the
spectrum.
Part Description
10 Pairing Connects the remote control to GrowElite
Grow Lights.
11 Grow Mode Select from 4 pre-set light spectrums
Flowering, Vegetating, General, and white.
12 Delete Disconnects the remote control from GrowElite
LED Grow Lights.
13 My Favor1 Saves a customized light spectrum setting as
a favorite.
14 My Favor2 Saves a customized light spectrum setting as
a favorite.
15 My Favor3 Saves a customized light spectrum setting as
a favorite.
16 My Favor4 Saves a customized light spectrum setting as
a favorite.
17 Timer Sets the timer from one of five settings in 24-hour
cycles.
18 Group1 Groups multiple fixtures into Group 1.
19 Group2 Groups multiple fixtures into Group 2.
20 Group3 Groups multiple fixtures into Group 3.
21 Group4 Groups multiple fixtures into Group 4.
22 Previous Selects the previous light fixture.
23 Next Selects the next light fixture.
2
5
4
7
6
9
LED
TM 8
11
10
13
12
15
TM
17
22
4

operating instructions

Connect remote control to a GrowElite
grow light
□ Turn on the GrowElite light fixture.
TM
□ Flip the switch on the GrowElite TM
setting within 60 seconds.
□ Press the Pairing button on the remote control. The GrowElite
grow light flashes 3 times to indicate it is connected to the
remote control.
note: If the GrowElite TM light fixture has not connected to the
1
remote control within 10 minutes, turn the grow light off and
on again to restart the pairing process.
Set-Up Groups of GrowElite
□ Use the Previous or Next button to cycle through the
GrowElite lights within range of the remote control until the
TM
desired light fixture is selected. Each light will flash 3 times to
3 indicate it is selected.
note: A fixture is not selected by pointing the remote control
18
at it. Press the Previous or Next buttons to cycle through all of
the fixtures until the desired fixture is selected.
19
□ Press the Group1, Group2, Group3, or Group4 button to add the
20
grow light to the respective group. The display will show the
21 group the light is associated with.
14
note: Up to 99 GrowElite TM
group. Each grow light can only be assigned to one group.
16
Customize and Save Favorite Light Spectrums
23
note: Four different customized light spectrum settings can
be saved as Favorites.
□ Press the Group1, Group2, Group3, or Group4 button to select
all of the GrowElite lights in that group or use the Next or
TM
Previous button to select a single GrowElite
will flash 3 times to indicate it is selected.
□ Press the red+, Blue+ and White+ buttons on the remote
control to add more of the respective color to the light output.
□ Press red-, Blue- and White- buttons on the remote control to
reduce the amount of the respective color in the light output.
□ Press My Favor1, My Favor2, My Favor3 or My Favor4 to save
the light spectrum setting as a favorite once the light spectrum
has been customized.
□ After the light spectrum settings have been saved, push My
Favor1, My Favor2, My Favor3 or My Favor4 to view the saved
settings.
LED Set the Timer via remote Control
TM
□ Turn the timer knob on the GrowElite
□ Press the Timer button on the remote control to toggle between
the preset timer settings: 0 (Timer off - Grow Light on 24 hours),
fixture to the remote Control
2, 4, 6 or 8 hours.
TM
note: Each timer setting operates in a 24-hour cycle. The
number of hours is the number of hours the GrowElite
will be on during each 24-hour cycle. For example, a setting of
2 hours means the grow light will be on for 2 hours and then
off for 22 hours, or a setting of 0 means the timer is off and the
grow light will remain on all the time.
□ To add a timer setting to a group, select the Group1, Group2,
Group3, or Group4 button and then press the Timer button to
Grow Lights
TM
choose one of the preset timer settings.
remove a connection between Grow Lights and
the remote Control
□ Press the Previous or Next button on the remote control to
select the GrowElite
the remote control. The GrowElite
indicate it is selected.
□ within 5 seconds of selecting the GrowElite
the Delete button for 3 seconds. The GrowElite
3 times to indicate the fixture has been disconnected from the
remote control.
□ To remove a group connection, select the Group1, Group2,
Grow Lights can be added to each
Group3, or Group4 button. Each light will flash 3 times to
indicate it is selected.
□ Hold down the Delete button for 3 seconds. The lights
associated with the selected group will flash 3 times to indicate
the fixtures have been disconnected from the remote control.
Wall Mounting
The GrowElite TM Remote Control (A) can be stored in and operated
from its wall mounting bracket (B).
□ Position the wall mounting bracket (B) in the desired location
light. Each light
TM
and mark the 2 screw holes with a pencil.
□ Take the mounting bracket (B) down from the wall and insert 2
drywall anchors (not included) in the marked locations.
□ Line up the wall mounting bracket (B) with the drywall anchors
and secure the mounting bracket (B) to the wall with the 2
mounting screws (not included).
□ Insert the GrowElite
TM
bracket (B) with the back of the remote control toward the wall.
□ Slide the GrowElite
TM
wall bracket (B).
note: The GrowElite
fixtures up to 100 feet away.
5
Please contact 1-855-384-7754 or further assistance.
TM light fixture to Off.
TM light
TM light that needs to be disconnected from
TM light will flash 3 times to
TM light, hold down
TM light flashes
remote control (A) into the wall
remote control (A) down to secure it to the
TM remote control (A) will operate light
www.ETISSL.CoM